TX1000 Manual V8 September 2013
16
Patrol settings
There are two preset patrols that can be started by the Tx1000.
To activate: Press either Key 1 or Key 2 followed by the Patrol key. 1 + Patrol will run the first patrol, 2 +
Patrol will run the second.
Their function is to enable a string of presets to be selected in turn, switching between presets after a fixed
period of time (default 30 seconds).
These patrols can be stopped at any time by moving the joystick, when selected the camera on which patrol
is running is selected.
To Programme a Patrol
There is no separate patrol-programming function with the BBV Tx1000 keypad. Once a preset has been
programmed, it is automatically included in Patrols 1 and 2.
To Remove a Preset from a Patrol
1. Select the receiver on which the patrol is to run.
2. Press
to gain access to the menu, then press 5 + camera button to remove a preset from
Patrol 1 or 6 + camera button to remove from Patrol 2, followed by the preset number to be removed
and again the camera button.
To Remove a Preset from Patrol 1:
To Remove a Preset from Patrol 2:
To Programme a Time Period for a Patrol
First, determine the time delay required from the table below:
Key Number
Time delay (seconds)
Key Number
Time delay (seconds)
1
Random 0 to 100 seconds
9
96
2 12
10 108
3 24
11 120
4 36
12 132
5 48
13 144
6 60
14 156
7 72
15 168
8 84
16 180
