TX1000 Manual V8 September 2013
15
Maximum Camera Number
To set the Maximum camera number, Press
, then enter 15 and then the camera button
followed by the maximum number of cameras connected to the system and then the camera button again.
Max Camera
Number
And
Option
Then
PROGRAM
Setting the maximum camera number will prevent the Tx1000 from patrolling through unused cameras on a
patrol.
The remainder of this manual refers to features found only on receivers that
support presets: Rx10X, Rx400P, Rx45X, Rx55X
Presets
To select a programmed preset, enter the number of the preset you would like to move to and then press
the preset button.
To programme a preset, first position the camera using the Up/Down and Left/Right arrows. Then set Zoom
and Focus. When satisfied with the position and the quality of the picture press
and select Option
1 with the 1 key followed by the camera button. When the on screen display changes to "Program Preset",
enter the number of the preset you wish to program and then the camera button.
To erase a preset, press the
key to gain access to the menu. Select Option 4 with the 4 key
followed by the camera button and when the display changes to "Erase Preset", select the number of the
preset to be erased and then the camera button.
