BAYTEK GAMES SQUIGGLE, Руководство по обслуживанию

Страница: 47 / 59

47
HOW TO
HOW TO
How to Replace Red Balls
How to Replace Yellow Ball
The Red Balls travel through the grey tube that is pressed into the
PVC pipe. No hose clamp is needed.
To remove and replace balls:
1.) Remove the lower back door of cabinet.
2.) Pull the grey hose from PVC pipe and place end into a bag or box
to collect the game’s red balls.
3.) Enter the game’s menu and select “Diagnostic” Menu.
4.) Select “Start Blowers”.
The red balls will fill the tube.
5.) Select “Sort Balls”
The tube will empty into the box in the back of the game.
6.) Install the new balls into the PVC tube. (Part # A5BA5802)
Important - Only install 18 red balls into the game.
7.) Push the grey hose back into the PVC pipe. No hose clamp needed.
The Yellow Ball travels through the grey tube that is hose clamped near the
12 Volt DC blower in the back of the game.
To remove and replace the yellow ball:
1.) Remove the lower back door of cabinet.
2.) Loosen the nut on hose clamp with a flat screwdriver or 5/16” nut driver,
remove the grey hose, and place end into a bag or box to collect the
yellow ball.
3.) Enter the game’s menu and select “Diagnostic” Menu.
4.) If the yellow ball is already showing at the top of the
game, select “Release Yellow Ball”.
The ball will drop into the tube.
(If the yellow ball is not at the top, select “Start Blowers” to get the yellow ball up to the top)
5.) Select “Sort Balls”
The tube will empty, the yellow ball will drop into the box in the back of the game.
6.) Install the new yellow ball into the PVC tube. (Part # A5BA3201)
Important - Only install 1 yellow ball into the game.AAPB6500
How to Replace Red Balls
How to Replace Yellow Ball
The Red Balls travel through the grey tube that is pressed into the
PVC pipe. No hose clamp is needed.
To remove and replace balls:
1.) Remove the lower back door of cabinet.
2.) Pull the grey hose from PVC pipe and place end into a bag or box
to collect the game’s red balls.
3.) Enter the game’s menu and select “Diagnostic” Menu.
4.) Select “Start Blowers”.
The red balls will fill the tube.
5.) Select “Sort Balls”
The tube will empty into the box in the back of the game.
6.) Install the new balls into the PVC tube. (Part # A5BA5802)
Important - Only install 18 red balls into the game.
7.) Push the grey hose back into the PVC pipe. No hose clamp needed.
The Yellow Ball travels through the grey tube that is hose clamped near the
12 Volt DC blower in the back of the game.
To remove and replace the yellow ball:
1.) Remove the lower back door of cabinet.
2.) Loosen the nut on hose clamp with a flat screwdriver or 5/16” nut driver,
remove the grey hose, and place end into a bag or box to collect the
yellow ball.
3.) Enter the game’s menu and select “Diagnostic” Menu.
4.) If the yellow ball is already showing at the top of the
game, select “Release Yellow Ball”.
The ball will drop into the tube.
(If the yellow ball is not at the top, select “Start Blowers” to get the yellow ball up to the top)
5.) Select “Sort Balls”
The tube will empty, the yellow ball will drop into the box in the back of the game.
6.) Install the new yellow ball into the PVC tube. (Part # A5BA3201)
Important - Only install 1 yellow ball into the game.AAPB6500
REPLACE RED BALLS
REPLACE YELLOW BALL