manualshive.com logo in svg

BAYTEK GAMES SQUIGGLE, Руководство по обслуживанию

Поделиться
Скачать
BAYTEK GAMES SQUIGGLE Скачать руководство пользователя страница 21

21

DIAGNOSTICS

DIAGNOSTICS

START BUTTON

Will display “Off” if large drop button is not pressed, “On” if pressed

COIN SWITCH 

PULSE

Will display “On” when a coinup pulse is detected on the Aux Monster board.  
Note that this may transition from “Off” to “On” and back to “Off” very quickly 
during coinup and may not be noticed.

DBA PULSE

Will display “On” when a DBA pulse is detected on the Aux Monster board.  
Note that this may transition from “Off” to “On” and back to “Off” very quickly 
during DBA pulse and may not be noticed.

LOW TICKET

Will Display “Off” when the low ticket condition switch is  not active, “On” when 
active

CLOCK FREQ.

The speed of the processor clock on the main board

PI TEMP

Temperature of the processor chip on the main board

RED, GREEN, BLUE

The raw A/D values of the currently selected ball color sensor.  Values range 
from 0 to 1024; any given color is represented as a mix of those three values.  
Usually these values are constantly updating, however, they will remain static for 
a time when the blowers are started until the balls have fallen into the tube

SENSOR ID

select the top or bottom ball color sensor to use for the above Red, Green, Blue 
display

TICKET 

DISPENSER

Pressing the Menu Select button with this item highlighted will send the signal to 
dispense one ticket to the ticket dispenser

RELEASE YELLOW 

BALL

Pressing the Menu Select button with this item highlighted will activate the 
yellow ball release solenoid.

SORT BALLS

Pressing the Menu Select button with this item highlighted will start a ball sort 
sequence.  The sequence will be for the last sensed stack of balls

START BLOWERS

Pressing the Menu Select button with this item highlighted will activate both the 
yellow and red ball blowers for their normal run times

BALL DISPLAY

The left side of the screen may contain vertical rows of red and yellow “balls”.  
These represent the last detected set of balls through the tube.  The stack on the 
left represents the top sensor and the stack on the right is for the bottom sensor.  
These displays will be cleared when the blowers are started.  When entering the 
diagnostics page this display will show the last-played game’s data.

Содержание SQUIGGLE




























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды