Page
37
Web Server Configuration
Menu 2: Web Server Configuration
Module Name
Select 1),
Web Enable,
to enable or disable
the web page feature,
Default is Enabled:
Web is ENABLED. Enable? (Y/N):
Web Login is DISABLED. Enable? (Y/N):
Select 2),
Web Login Enable,
to enable or
disable the login window to the web page,
Default is Enabled
Select 3),
Web SSL Enable (Secure
Comm),
to enable or disable a secure web
connection to the web page,
Default is
Disabled:
Select 4),
Web Login Inactivity Timeout,
to
set the Inactivity timeout to the web page,
Default is zero minutes:
Web Connection Inactivity Timeout is 0 minutes
Enter timeout, in minutes (<=120, 0 to disable) :
Web Enable........................1
Web Login Enable..................2
Web SSL Enable (Secure Comm)......3
Web Login Activity Timeout........4
Exit..............................X
NOTE:
For this feature to operate the network port must have an IP Address assigned.
Type the unit’s IP Address on a web browser to get the unit web page, i.e.
http://70.150.140.95
NOTE:
The web page is a quick test to see if SNMP protocol is working in the unit, if SNMP has
been enabled.
IMPORTANCE:
Currently, all users who access the unit through the web page have administrator
privilege, unless a TACACS server and privilege levels are used for authentication.
Select 13), from the Network Port
Configuration Menu
for the Web Server
Configuration menu:
IMPORTANCE:
If a user is still connected to the outlet controller menu, or the user does not
properly release the controller, the Web page will not update.
Module Name is: RPC
Enter Module Name (32 chars max):
Select 9), from the Network Configuration menu
to
change the unit name.
Web secure SSL connection is DISABLED. Enable? (Y/N):
