6
5. Return frame assembly to upright position and
fully tighten leg bolts with a wrench.
6. Attach Hose to Burner:
It is important to properly connect the orifice to the burner. The male hose connector with
orifice will screw directly into the burner. To attach, hold the air shutter up against the end of the burner. Place
the small end of the spring onto the male connector, and insert into threaded hole of the burner. Screw the male
connector into the burner until the spring is mostly compressed and connection is firm. The air shutter should be
allowed to turn freely, but still hold its position.
ATTENTION: Do not cross-thread.
7. Install two “AAA” alkaline batteries (not included):
Remove the battery cover on the Gas Flow Timer and
match the positive (+) and negative (-) symbols on
the case and batteries.
*Fully Assembled Fryer Kit
Male Connector
with #59 Orifice
8. Read all instructions in this manual regarding
the LP Cylinder and Hose Valve Regulator
before connecting the cooker to the fuel supply.
