2-8
119136-D Rev. 00
NauticaRS 5.016R Release Notes for Nautica 200
The Trace window and syslog debug messages and debug levels
have been rationalized. Several new debug parameters have been
introduced to assist with specific debugging. For example, LCP
options can be examined by increasing the “lcpdb” parameter
without having to increase “pppdb” parameter.
ISDN Autocalls
It is now possible to disable all ISDN autocalls. This feature can
be accessed via the Disable Autocalls button on the Nautica
Wizard toolbar, but is also available as a BCC parameter in the
SYSTEM context.
disable-autocalls yes | no
Default Parameters
Some of the default router parameter values have changed:
The default IP address of a Nautica router is now 10.1.1.1
(changed from 1.1.1.1)
By default DHCP is enabled in the SYSTEM context (the router
will act as a DHCP server once a table entry has been defined).
By default the all-protocols parameter is set to “yes” in the NAT
context (unknown protocols are now passed by default instead of
being blocked).
The default blacklist timeout is now 20 seconds ( see
page 2-11
if
exponential backoff is required to limit costs in areas where
charges are made per call attempt).
