baxter Flo-Gard 6201, Руководство оператора

Страница: 23 / 52

2. Press the
PRI VTBI
key (or
SEC VTBI
, if you are pro-
gramming a secondary
infusion).
3. Program the desired
VTBI on the keyboard. To correct a mistake, press the
CLR
key
and re-enter the correct VTBI.
4. Press the
TIME
key. Enter
the amount of time (up
to 99 hours and 99 min-
utes) over which you
wish the infusion to take
place.
To correct a mistake, press the
CLR
key
or
TIME
key again and re-enter the cor-
rect time.
5. Press the
PRI RATE
(or
SEC RATE
) key.
a. The pump calculates the flow rate
required to deliver the desired VTBI
in the specified time period.
b. If the calculated flow rate is higher
than the pump's capabilities, the
message
Hi is displayed. To correct a
Hi message, repeat the procedure
from step 2 and enter a longer time
period if appropriate.
c. If the calculated rate is too low, the
message
Lo is displayed. To correct
a Lo message, repeat the procedure
from step 2 and enter a shorter time
period if appropriate.
6. Verify that the calcu-
lated rate is acceptable
before pressing
PRI START
(or
SEC START
) to begin
the infusion.
19
Rev.B