21
912.807.1 - GB
INSTALLATION AND OPERATING MANUAL
The system must be fitted with an ambient thermostat for controlling indoor temperature.
To connect this device, proceed as follows:
13. CONNECTING THE AMBIENT THERMOSTAT
r BDDFTTUIFFMFDUSJDBMDPNQPOFOUTBTEFTDSJCFEJOQBSBHSBQI
r SFNPWFUIFKVNQFSPOUIFFMFDUSPOJDCPBSEUFSNJOBMT $/"# TFFXJSJOHEJBHSBNTJOfBOE'JHVSF
r UISFBEUIFUXPXJSFDBCMFUISPVHIUIFHSPNNFUTPGUIFFMFDUSJDBMCPYBOEDPOOFDUJUUPUIFTFUXPUFSNJOBMTVTJOHB
harmonised cable “HAR H05 VV-F” 2 x 0.75 mm2 with a maximum diameter of 8 mm.
13.1 SINGLE-ZONE MODELS: RA
These models are fitted for two ambient thermostats in order to provide independent management of two zones at diffe-
rent temperatures.
r BDDFTTUIFFMFDUSJDBMDPNQPOFOUTBTEFTDSJCFEJOQBSBHSBQI
r SFNPWFUIFKVNQFSPOUIFFMFDUSPOJDCPBSEUFSNJOBMT $/"#BOE $/%. TFFXJSJOHEJBHSBNTJOfBOE
Figure 11).
r UISFBEUXPXJSFDBCMFTUISPVHIUIFHSPNNFUTPGUIFFMFDUSJDBMCPYBOEDPOOFDUUIFNUPUIFUXPUFSNJOBMTVTJOH
harmonised cables “HAR H05 VV-F” 2 x 0.75 mm2 with a maximum diameter of 8 mm.
13.2 DUAL-ZONE MODELS: RA2Z
Figure 11: Ambient thermostat connections
0904_2408 / CR_0026
A.T. ZONE II
(MODELS R2Z-RS2Z-RA2Z)
A.T. ZONE I
A.T. ECO CRONO
CONNECTOR ON BOARD
TO WIRE