9
912.807.1 - GB
INSTALLATION AND OPERATING MANUAL
0607_0201 / CR_0029
Figure 2: casing/template
CASING/TEMPLATE MODEL
WIDTH
SIRIUS SAT MODELS
SINGLE-ZONE SIRIUS SAT KIT
L = 600 mm
RA
DUAL-ZONE SIRIUS SAT KIT
L = 800 mm
RA2Z
Install
SIRIUS SAT
model inside the casing/template supplied in a separate pack.
Make sure the template casing model is correct (L= 600 or L=800 mm).
Fit the template/casing in a niche in the wall made for this purpose (dimensions indicated in figures 2 and 3) and secure it
with the relative lateral bent pins. Make sure the installation allows easy access for maintenance.
Remove the door and white frame and put back after installation (make sure the casing accessories also include the key
for opening the door).
The frame can be depth-adjusted by using the 4 butterfly nuts located in the side guides. It is therefore possible to fit the
frame flush against the plaster and remove it when painting the wall.
Assemble the system starting from the position of the water connectors on the lower crossbar of the template (recessed
into the casing by 30 cm).
Install the casing in the stairwell outside the apartment to heat.
4. MOUNTING THE TEMPLATE CASING
SIRIUS SAT
SINGLE-ZONE CASING
SIRIUS SAT
DUAL-ZONE CASING
L = 600
H = 650
P = 150
L = 800
H = 750
P = 150