Baxall HYPER-D Series, Руководство по установке

Страница: 7 / 12

Installation Instructions Hyper-D Series
7
MENU SYSTEM
Hyper-D series cameras utilise a menu system to facilitate setup and adjustment. The
buttons used to access and navigate the menu are located behind the flap on the side of
the camera.
Entering the Menu System
To enter the menu system, press and hold the Enter button (8, figure 1) for approximately
two seconds. A menu similar to the one shown below will be displayed on the monitor.
Navigating the Menu System
Use the direction buttons to navigate the menu, and to select parameters.
Exiting the Menu System
The menu system can be exited by selecting SAVE AND EXIT with the up/down menu
buttons and then pressing the Enter button. Any changes made while within the menu
system will be saved. The menu system will be automatically exited if a key is not pressed
for 2 minutes. Any changes made will not be saved should the menu system time-out.
> MODE <NORMAL>
AGC MED
WHITE BALANCE RANGE PRO
FLUORESCENT OFF
SYNC INTERNAL
SAVE AND EXIT