Installation Instructions
Hyper-D Series
5
CONNECTORS AND CONTROLS
Figure 1 Connectors and Controls
POWER SUPPLY CONNECTION
The power supply must be a class 2 isolated type
. The green POWER LED on the rear
panel indicates when power is connected.
1. Low-voltage power supply terminals
2. Composite video output BNC
3. Power LED
4. Decrease parameter button
5. Menu down button
6. Increase parameter button
7. Menu up button
8. Enter button
9. DD/Video Lens conector
10.Back focus adjustment screws
11.Video format selector switch
12.1/4-20 UNC mounting bush (top and bottom)
