Hyper-D Series
Installation Instructions
6
VIDEO CONNECTION
FOCUS ADJUSTMENT
Turn the back focus adjuster screw (10, figure 1) clockwise or anticlockwise to obtain
focus. When the focus is sharp, turn the adjustment screw 2 or 3 turns anticlockwise. The
picture will lose sharpness. Turn the screw clockwise until focus is once again obtained. If
you pass the point of best focus, repeat the procedure.
The last turn of the back focus
adjustment screw must always be in a clockwise direction
. Do not over turn or force
the back focus mechanism.
VIDEO FORMAT SELECTOR
The video format switch is used to select the video format required.
LENS CONNECTIONS
Connect the auto iris lens to the 4-pin iris drive connector located on the side of the camera.
Pin connections for the iris drive connector are as follows:
(Diagram shows connector view)
