Baumuller B MaXX 4000 Series Скачать руководство пользователя страница 43

Страница: 43 / 76

of 74

Instruction handbook

b maXX

(BM4-F-)DIO/FIO-XX (Digital IO module)

Document No. 5.01046.06

OMMISSIONING

PERATION

This commissioning assures, that the

DIO/FIO-XX

BM4-F-DIO/FIO-XX

has been cor-

rectly recognized. Further information relating to commissioning and parameter settings
of the encoder module can be found in parameter manual

b maXX

4000

5.03039.

Assure, that before commissioning the following preconditions are fulfilled:

The

BM4-F-DIO/FIO-XX

is correctly mounted (standard controller only).

2 DIO/FIO-XX

BM4-F-DIO/FIO-XX

is correctly installed

The digital inputs and outputs must be correctly cabled.

The connection must be suitable to the electrical specification of the

DIO/FIO-XX

BM4-F-DIO/FIO-XX

The switching cabinet is properly closed and all safety devices are put into operation

The

b maXX

4000

is ready-for-use.

8.1

Safety notes

Basics

WARNING!

Risk of injury due to improper operation!

Improper operation can lead to severe personal injury or material damage.

Therefore:

Perform all operational steps according to the details of these instruction hand-
book.

Before beginning any work, ensure that all coverings and protective devices are
installed and are functioning properly.

The control cabinet in which the device is installed should be protected against
contact with electrically live parts.

Keep all doors of the control cabinet closed during operation.

Содержание B MaXX 4000 Series













































































Результаты поиска

Содержание B MaXX 4000 Series

Отзывы:

Похожие инструкции для B MaXX 4000 Series

Бренды по названию

Популярные бренды

Baumuller B MaXX 4000 Series, Инструкция по эксплуатации

Результаты поиска

Содержание B MaXX 4000 Series

Отзывы:

Похожие инструкции для B MaXX 4000 Series

Бренды по названию

Популярные бренды