Baumer CombiTemp TFRH, Руководство по эксплуатации

Страница: 5 / 54

Operating Instructions
Temperature measurement
CombiTemp™
TFRH/N
RTD temperature sensor
5.2
TFRH mounting
DANGER
Risk of injury from hazardous medium
„ f
Only use weld-in sleeves or adapters from Baumer.
„
f
Wear protective equipment for hazardous media (e.g. acids, alkaline solutions).
„
f
Do not seal the process connections with Te
fl
on tape (PTFE) or elastomer.
„ f
Empty vessel and pipes before mounting.
1
2
TFRH with the following process connections:
„ „
3A DN 38 (BHC)
„ „
ISO 2852 DN 38 (Tri-Clamp)
„ „
ISO 2852 DN 51 (Tri-Clamp)
„ „
Varivent® type N
9
Hole for mounting the sensor is easily accessible
9
Vessel and pipe are free of media
„
f
Mount weld-in sleeve or adapter as follows:
„ „
3-A mark or arrow points upwards
„ „
Leakage hole points downwards
„ „
Hygienically and internally
fl
ush
„
f
Grind welding to Ra ≤ 0.8 μm.
„
f
Push sealing ring on (1).
„ f
Mount sensor on vessel or pipe and tighten the
closure clamp (2).
„ f
Check leak-tightness.
TFRH with the following process connections:
„ „
G 1/2 A hygienic
9
Hole for mounting the sensor is easily accessible
9
Vessel and pipe are free of media
„ f
Mount weld-in sleeve or adapter as follows:
„ „
3-A mark or arrow points upwards
„ „
Leakage hole points downwards
„ „
Hygienically and internally fl ush
„ f
Grind welding to Ra ≤ 0.8 μm.
„ f
Screw in sensor.
Tightening torque: 20 Nm
„
f
Check leak-tightness.
www.baumer.com
5 / 54