Baumer CombiTemp TFRH, Руководство по эксплуатации

Страница: 13 / 54

Operating Instructions
Temperature measurement
CombiTemp™
TFRH/N
RTD temperature sensor
8. Configuration
8.1 Configuring DFON touch screen
„ f
Tap on the display screen and hold until the menu button appears.
„ f
Press menu to start the con fi guration.
Example
„ f
Co nfi gure screen layout.
Display menu Display setup Screen layout Select display design FlexTop specific screens Menu
Further possible settings:
„ „
Relays
„ „
Warning and error indication
„ „
Screen layout
„ „
Color
„ „
Language
8.2 Configuring transmitter via DFON touch screen
For TFRH/N with mounted FlexTop™ 2212 and FlexTop™ 2222 transmitters further con fi gurations can be
programmed via DFON touch screen.
„ f
Tap on the display screen and hold until the menu button appears.
„
f
Press menu to start the con
fi
guration.
Example
„
f
Con
fi
gure input range.
Input config.
Input range Input at 4 mA
Input at 20 mA
Temp. value
Temp. value
FlexTop menu Menu
„ f
Co nfi gure damping range.
FlexTop menu Menu Output config. Output damping Damping value
Further possible settings:
„ „
Sensor type
„ „
Temperature unit
„ „
Output limit
„ „
Sensor offset
8.3 Configuring transmitter via FlexProgram
DANGER
FlexProgrammer is not ATEX approved for use in explosive atmospheres
„
f
Do not use FlexProgrammer in explosive atmospheres.
Configuring with FlexProgrammer and PC
„ f
Remove front cover/DFON display from TFRH/N.
„ f
Connect FlexProgrammer to FlexTop 2202.
„ f
Connect FlexProgrammer to PC and set
parameters (see FlexProgrammer instructions).
1
2
www.baumer.com
13 / 54