Baumer 11188367, Руководство пользователя

Страница: 28 / 36

Manual R600V.DAH5 Multi-object (EN)
Page 28 of 36 R600V.DAH5_multiobject_manual_1.1 (EN).docm
Last Update: 01 Jan 2021
Address Parameter range offset scaling Default value
0x07E394 Time to wait after sending a re-
quest for address claimed mes-
sage before own address claim is
sent 0..5000 0 1ms 1250
0x07E39D Compare mask for “bitwise AND”
of ISO name used for Master ECU
Detection 0..0xffffffffffffffff 0 1 0
0x07E39E Compare value for ISO name used
for Master ECU Detection (after
applying bitwise mask defined in
0x07E39D) 0..0xffffffffffffffff 0 1 0
0x07E395 Delay between detection of master
address claim and starting RUN
mode 0..5000 0 1ms 250
0x07E396 Delay between detection of master
address claim and first PDU1
transmission 0..5000 0 1ms 200
0x07E398 Lowest device address to claim in
address resolution sequence 128..209 0 1 128
0x07E399 Highest device address to claim in
address resolution sequence 128..209 0 1 209
0x07E39A CAN Bus speed.
0 = 250k
1 = 500k
2 = reserved (do not use) 0..1 0 1 0
0x07EF40 Reset device to default values
Write data in this sequence to reset all non-volatile SPNs to default values:
0x00, 0xAA, 0x55, 0x12, 0x34
(4) Detection range can be adjusted to avoid issues with double echo detections.
(5) SPN value is reset to default after a power cycle (volatile)