Baumatic BMEH381I, Инструкция по использованию и установке

Страница: 23 / 32

23
Switching hotplates off
• Selected hotplate must be activated.
• By touching the slide sensor (F) at the start, bring the power setting to “0”. Short beep
confirms the OFF position.
Switching the hob off
• The hob is switched off by pressing the main (A) sensor.
• The sound signal beeps and all indicators go off, except for those hotplates which are
still hot and display the warning “H” sign as an indication of the remaining heat.
• If you switch the hob off prior end of cooking session, use the remaining heat and save
electric energy.
Locking the control unit By activating the key lock protection you can stop the operation of the appliance and the
use of hotplates.
Activating the control unit lock
• The cooktop must be turned on.
• Press the sensor (C) for approximately 1 second, the corresponding LED turns on
above the key, the block is active.
• Safety lock prevents the activation of al sensors, except for (A) and (C) sensor.
• If the hob is switched off when the lock function is activated, it remains in memory until
a new switches the hob.
• When set timers end their time, alarms can be switched by activating (D) or (E) keys
without need for unlocking the control.
Deactivating the control unit lock
• The cooktop must be turned on
• Press the sensor (C) for 1 second; after that, the unlocking is confirmed by a beep.
Pause function
The execution of the function is only possible if at least one zone is on.
The pause condition may also be activated with cooking zone specific errors, here,
the error display is hidden. Also residual heat indication, special messages such as
A, P or no pan are hidden; the pause display has priority. If there is a general error
during the pause, the control switches off and terminates the mode
.
Activating the Pause function
• Press the sensor (C) for at least 1 second, the corresponding LED turns on above the
key
and all displays show the symbol “II”.
While the Pause function is active:
• Any Timer (also Egg-timer) set before the pause will be stopped during the pause and
continue when pause mode is quitted.
• A selected booster or heat up time automatic function is terminated.
• Residual heat calculation and maximum operation time limitations will not be interrupted
and keep on working in the background.
• Functional LED’s such as Timer, multi-zone, keep on glowing according to their status.
The pause mode can only be active for maximum 10 min. If the pause mode is not
deactivated within 10min the control switches off automatically. Throughout the
pause time the (A) button can be used to switch the control off. In this case the
pause mode is also deactivated.
Deactivating the pause mode:
• Press the (B) followed, the LEDs light up above the cursor of one of cooking zones.
• Within 10 seconds press and scroll from the left to the right on the cursor of the
illuminated area.
The LED above the pause key turns off and the condition before the pause mode is
restored.
Recall function
If the control was accidentally switched off through the main switch (A) all settings can be
restored using the recall function. After switching the control off from the main switch the
user has 6s to switch the control on again and then he has another 6s to press the pause
button (B) in order to recall the settings. The recall function can only be used if at least one
cooking zone was active (cooking level >0) independent from key lock.