Baumatic BMEH381I, Инструкция по использованию и установке

Страница: 12 / 32

12
▪ If the special function key is pressed a second time “warming” level two is activated. The
second LED is activated.
▪ If the special function key is pressed a third time “simmering” level three is activated. The third
LED is activated.
If the special function key is pressed a fourth time the warming function ends.
Safety switch off Maximum continuous operation of a particular hotplate is limited, and the duration is displayed in
the above chart. When the hotplate is switched off by the safety mechanism, the indicator
displays symbols “0”, or “H” in case there is any remaining heat left.
In such cases switch the hotplate off by touching the slide sensor (F) at the start, bring the power
setting to “0”.
Example:
Set the hotplate to power level 5 and leave it operate for some time. If you do not change the
above setting, the safety mechanism will switch the hotplate off after 4 hour and a half.
Power setting 1 2 3 4 5 6 7 8 9
Hours lapse prior safety
switch off
6 6 5 5 4 1.5 1.5 1.5 1.5
Protection from
overheating
Induction hotplate is also fi tted with safety device against overheating which protects electronic
parts from damages. This device operates on several levels. When temperature of the hotplate
excessively rises, it switches on two-stage fan. If this is not enough, extra powerful heating is
deactivated, and finally the safety device either reduces the heating power of certain hotplates or
turns them off completely. When the hotplate cools off, the full power of hotplate is again
available.
Timer Use of timer facilitates cooking by setting the time of hotplate operation.
Turning timer on
• The cooktop must be turned on and the zone where you want to set the timer must be
working.
• Simultaneously press sensor (D) and (E), the timer's display shows “0.00”, and the LED to the
right of the display, of the first active cooking zone from the left, lights on.
• Simultaneously press (D + E) as many times as necessary, to select the zone where you want
to set the timer. The LED lights on only for the active cooking zones.
• Within 10 seconds since pressing the (D + E) set the timer value by pressing the sensors (D)
or (E).
• The value of the timer can be displayed:
-
in minutes and seconds up to 9min59sec;
-
in hours and minutes up to 9h59min,
in this case the word “min” is shown under
the timer’s display.