Baumatic BMEH381I, Инструкция по использованию и установке, Страница: 20 / 32

20
Timer Use of timer facilitates cooking by setting the time of hotplate operation.
Turning timer on
• The cooktop must be turned on and the zone where you want to set the timer must be
working.
• Simultaneously press sensor (D) and (E), the timer's display shows “0.00”, and the LED
to the right of the display, of the first active cooking zone from the left, lights on.
• Simultaneously press (D + E) as many times as necessary, to select the zone where
you want to set the timer. The LED lights on only for the active cooking zones.
• Within 10 seconds since pressing the (D + E) set the timer value by pressing the
sensors (D) or (E).
• The value of the timer can be displayed:
-
in minutes and seconds up to 9min59sec;
-
in hours and minutes up to 9h59min,
in this case the word “min” is shown
under the timer’s display.
Operation time can be set for each hotplate separately.
Changing preset cooking time
• Cooking time can be changed anytime during the operation.
• Simultaneously press sensor (E) and (D).
• Simultaneously press (D + E) as many times as necessary, to select the zone of which
you want to adjust the timer. The zone is identified by the lighting on of of the LED to
the right of the display.
• Press the sensors (D) or (E).
• If time is not modified in 10 seconds since pressing the sensor (D+E), the timer is
keeping the count-down before the adjusting operation.
Checking remaining cooking time
• Last set timer is always displayed, (the LED to the right of the display of the cooking
zone in question has a lighting stronger than the others).
• Simultaneously press sensor (E) and (D).
• Simultaneously press (D + E) as many times as necessary, to select the zone of which
you want to see the remaining time. The zone is identified by the lighting on of the LED
to the right of the display.
• The timer's display will display the remaining time of the selected cooking zone.
Turning timer off
When pre-set time elapses, a beep signals the end, and the hotplate is switched off.
Switch off the alarm by pressing the sensor (D) or (E) or it switches off automatically after
2 minutes.
If you want to switch off the timer prior the end of pre-set time:
• Simultaneously press sensor (E) and (D).
• Simultaneously press (D + E) as many times as necessary, to select the zone of which
you want to disable the timer. The zone is identified by the lighting on of the LED on the
right of the display.
• Press (D) to the value “0”.
• The illuminated point to the left part of the display is turned off and the timer is
deactivated.