Baumatic BMEH381I, Инструкция по использованию и установке, Страница: 21 / 32

21
• If in 10 uninterrupted minutes no cookware is detected on one of the two elements, the
bridge function is automatically deactivated, the uncovered cooking element is switched off
and the covered cooking element remains as the single cooking element switched on with
the set cooking level.
Deactivating Bridge Function
The end of the Bridge Function can be done by repeating the simultaneous selection of
both cooking elements (the same as activation).
If the bridge function is deactivated while in operation, than both cooking elements go to
level “0” and can then be set again.
Warming Function
The warming function is used to keep cooked food warm.
Hence this function can also be used as melting or simmer function.
Activating heating function:
▪ Pressing the special function key (G) of a cooking zone activates the “melting” function.
The first LED is activated.
▪ If the special function key is pressed a second time “warming” level two is activated.
The second LED is activated.
▪ If the special function key is pressed a third time “simmering” level three is activated.
The third LED is activated.
If the special function key is pressed a fourth time the warming function ends.
Safety switch off Maximum continuous operation of a particular hotplate is limited, and the duration is
displayed in the above chart. When the hotplate is switched off by the safety mechanism,
the indicator displays symbols “0”, or “H” in case there is any remaining heat left.
In such cases switch the hotplate off by touching the slide sensor (F) at the start, bring the
power setting to “0”.
Example:
Set the hotplate to power level 5 and leave it operate for some time. If you do not change
the above setting, the safety mechanism will switch the hotplate off after 4 hour.
Power setting 1 2 3 4 5 6 7 8 9
Hours lapse prior safety
switch off
6 6 5 5 4 1.5 1.5 1.5 1.5
Protection from overheating
Induction hotplate is also fi tted with safety device against overheating which protects
electronic parts from damages. This device operates on several levels. When temperature
of the hotplate excessively rises, it switches on two-stage fan. If this is not enough, extra
powerful heating is deactivated, and finally the safety device either reduces the heating
power of certain hotplates or turns them off completely. When the hotplate cools off, the
full power of hotplate is again available.