Baumatic BK600F, Инструкция по эксплуатации

Страница: 17 / 24

o
Carefully turn the hob upside down and place it on a cushioned
mat.
o
Apply the sealing strip provided around the edge of the
appliance.
o
The protective covering must be removed from both sides.
o
Do not leave a gap in the sealing agent or overlap the thickness.
o
IMPORTANT: Do not use a silicon sealant to seal the appliance
against the cut-out. This will make it difficult to remove the hob
from the aperture in future, particularly if it needs to be
serviced.
(B) Fixing
bracket
(C) Screw
o
Use the fixing bracket that is
appropriate for your thickness of
worktop.
o
Place a fixing bracket (B) over the
hole in each corner of the
underneath of the hob. Then place a
screw (C) through the hole and
fixing bracket (B). Tighten the
screws partially, so that the fixing
brackets stay in place.
IMPORTANT: Do not tighten the
screws fully.
17