Baumatic BK600F, Инструкция по эксплуатации

Страница: 20 / 24

Replacing the mains supply cable
If the mains supply cable is damaged, then it must be replaced by an
appropriate replacement.
The mains supply cable should be replaced in accordance with the
following instructions:
o
Switch the appliance off at the control switch.
o
Open the terminal block on the underside of the hob.
o
Unscrew the terminal screws fixing the cable.
o
Replace the cable with one of the same length and in accordance
with the specification given on page 18.
o
The “green-yellow” earth wire must be connected to the terminal
marked
. It must be about 10 mm longer than the live and
neutral wires.
o
The “blue” neutral wire must be connected to the terminal
marked with letter (N) - the live wire must be connected to the
terminal marked with letter (L).
My appliance isn’t working correctly
o
The cooking zones are not functioning or will not switch
on.
*
Check that the mains electrical supply to the appliance is correct
and working. Check the mains fuse.
o
The residual heat indicator has not come on after I have
switched a cooking zone off.
*
The cooking zone has only been turned on for a short period of
time; therefore it did not go above 65°C.
*
IMPORTANT: If the cooking zone does appear to be hotter than
65°C and the residual heat indicator has not come on, you
should call the Baumatic Customer Care Department.
o
A humming sound is heard when a cooking zone is
selected.
*
This is normal; the sound will disappear when the zone heats up.
20