o
You must ensure that there is a hole to feed the electrical cable
through. There must also be holes left to connect the appliance
to your mains water supply and to your drain outlet. These steps
must be done before commencing the rest of the installation
process.
o
IMPORTANT: The stop valve for your water supply MUST be
easily accessible during an emergency.
o
Before proceeding with the rest of the installation, you must
connect the inlet hose and the outlet hose to the rear of the
appliance. See the relevant section of this manual.
o
Feed the electrical cable, inlet hose and outlet hose through the
holes in the housing unit that you made previously.
Positioning the appliance
o
Ensure there is a minimum
space of 50 mm in front of the
dishwasher door. This will enable
the door to be opened and
closed freely with no
obstructions.
30
