Error codes
o
When some malfunctions occur, the appliance will display an
error code to warn you.
Codes Meanings
Possible
causes
The RAPID
light flickers.
Longer inlet
time.
Tap is not opened or water intake is
restricted or water pressure is too low.
The GLASS
light flickers.
Overfilled.
Too much inlet water or some element
of the dishwasher leaks.
IMPORTANT: If any other fault code appears on the LED
display or the same fault code reoccurs, you should not
attempt to clear it yourself and contact the Baumatic
Customer Care Department.
IMPORTANT: If your appliance appears not to be
operating correctly, then you should disconnect it
from your mains supply and then contact
Baumatic Customer Care on telephone number
(0118) 933 6911.
DO NOT ATTEMPT TO REPAIR THE APPLIANCE
YOURSELF.
Please note that if an engineer is asked to attend whilst the product is
under guarantee and finds that the problem is not the result of an
appliance fault, then you may be liable for the cost of the call out
charge.
The appliance must be accessible for the engineer to perform
any necessary repair. If your appliance is installed in such a
way that an engineer is concerned that damage will be caused
to the appliance or your kitchen, then he will not complete a
repair.
This includes situations where appliances have been tiled in,
sealed in with sealant, have wooden obstructions placed in
front of the appliance, like plinths. Or any installation other
than the one specified by Baumatic Ltd. has been completed.
Please refer to the conditions of guarantee that appear on the
warranty card that you receive with the appliance.
IMPORTANT: Baumatic Ltd. operates a policy of continuous
improvement and reserves the right to adjust and modify its
products without prior notification.
40
