Control panel
1)
Power indicator light and switch.
2)
Salt warning indicator
3)
Rinse aid warning indicator
4)
Delay start button and LEDS
5)
Delay start indicator
6)
Program button
7)
Program indicator LEDS
Using your dishwasher
Before first use
o
Install the appliance as per the installation instructions contained
within this booklet.
o
Fill the water softener with 1 litre of tap water and then fill with
specialist dishwasher salt. After this you should set the water
softener level.
o
Fill the rinse aid dispenser and then set the rinse aid dosage.
Filling with dishwasher salt
IMPORTANT: You should only use salt that is specially
designed for use in a dishwasher. If any other type of salt is
used in the appliance (in particular table salt), it will damage
the water softener.
o
Ideally you should fill the water softener with salt, just before
you are about to run a wash program. This will help to clear any
salt that may have overflowed from the water softener during
the salt filling process.
