22
o
Check whether the salt required icon (2) or rinse aid required
icon (3) are lit. If they are, then before continuing with the wash
program you should fill the dishwasher with salt and/or rinse aid.
o
Press the program selection button (6) until the relevant
program indicator (7) lights to make your selection. The
programs will scroll in the following order:
Intensive
Normal
Eco
Glass
1 hour
Rapid
o
Close the dishwasher door and ensure it is securely shut. After
10 seconds the washing cycle will being.
IMPORTANT: When you open the dishwasher door to pause the
cycle, the program light will stop blinking and the dishwasher
will emit an acoustic signal every minute until the door is
closed again.
Changing the wash program
o
If a cycle has only been running for a short time, then it can still
be modified. Otherwise, the detergent may have already been
released and the appliance may have already drained the wash
water.
o
Once the wash cycle is in full progress, we do not recommend
that you attempt to change the wash program.
o
However if you do wish to do this, you should open the door a
little way to stop the cycle.
o
Press and hold the program selection button (6) for about 3
seconds to cancel the current program.
o
You can then select another program as before, using the
program selection button (6).
o
IMPORTANT: If you open the door during a wash cycle,
the machine will pause. When you close the door again,
the machine will continue the cycle after approximately
10 seconds.
Adding more dishes
o
A forgotten dish can be added any time at the start of a wash
cycle before the detergent is released.
o
To do so you should open the dishwasher door a little way to
pause the program.
