Baumatic B6FS Скачать руководство пользователя страница 15

Страница: 15 / 16

TECHNICAL ASSISTANCE AND SPARE PARTS

Before leaving the factory, this appliance will have been tested and regulated by expert and

specialized personnel in order to guarantee the best performances.

Any repairs or adjustments which may be subsequently required may only be carried out by

qualified personnel with the utmost care and attention.

For this reason, always contact your Dealer or our nearest After Sales Service Center

whenever repairs or adjustments are required, specifying the type of fault and the model of the

appliance in your possession.

Please also note that genuine spare parts are only available from our After Sales Service

Centers and authorized retail outlets.

The fore-mentioned data in this manual are printed on the data label put on the bottom part of the

appliance and on the packing label. The above informations give to the technical assistant the

possibility to get fit spare parts and a heaven-sent intervention.

If this assistance is required in the future it will be done so in a more timely manner by completing

the product information on page 2 of the manual for quick reference.

Содержание B6FS
















