Bauer BG 25 Скачать руководство пользователя

Страница: 116 / 183

RIGGING / DE-RIGGING

BG 25 / 2011 /

2254_BG25_en_0000498763_V01

7 - 33

7.10 RETRACTING THE CRAWLERS

WARNING!

Squashing hazard, shearing hazard and drawing-in hazard!

The machine must be out of motion during work on the undercarriage.
A reliable communication between person at undercarriage and opera-
tor in cab must be provided at all times.
The danger zone must be cleared before crawlers are retracted.

Do not retract the right and left crawler simultaneously.

● On both crawlers, clean and grease the

sliding surfaces (3).

● On one crawler, remove retainers (2)

and remove pins (1) from the lock posi-
tion B.

● By button

Bk19030013.wmf

retract the crawler while travelling for-
ward and reverse.

● Reinstall the pins (1) at the position A",

and secure the pins with retainers (2).

● Repeat the procedure with the other

crawler.

BV737445.jpg

BV737516.jpg

Содержание BG 25
























































































































































































Результаты поиска

Содержание BG 25

Отзывы:

Похожие инструкции для BG 25

Бренды по названию

Популярные бренды

Bauer BG 25, Инструкция по эксплуатации

Результаты поиска

Содержание BG 25

Отзывы:

Похожие инструкции для BG 25

Бренды по названию

Популярные бренды