Page 5
For technical questions, please call 1-888-866-5797.
Item 58308
SA
FETY
OPERA
TI
O
N
MAINTENANCE
SETUP
10.
Hold power tool by insulated gripping surfaces
only, when performing an operation where
the accessory may contact hidden wiring
or its own cord.
An accessory contacting a
ƎOLYHƎZLUHPD\PDNHH[SRVHGPHWDOSDUWVRI
WKHSRZHUWRROƎOLYHƎDQGVKRFNWKHRSHUDWRU
11.
Never lay the power tool down until the
accessory has come to a complete stop.
7KHVSLQQLQJDFFHVVRU\PD\JUDEWKHVXUIDFH
DQGSXOOWKHSRZHUWRRORXWRI\RXUFRQWURO
12.
Do not run the power tool while carrying
it at your side.
Accidental contact with the
VSLQQLQJDFFHVVRU\FRXOGVQDJ\RXUFORWKLQJ
SXOOLQJWKHDFFHVVRU\LQWR\RXUERG\
13.
Regularly clean the power tool’s air vents.
The motor’s fan will draw the dust inside
WKHKRXVLQJDQGH[FHVVLYHDFFXPXODWLRQRI
SRZGHUHGPHWDOPD\FDXVHHOHFWULFDOKD]DUGV
14.
Do not operate the power tool near flammable
materials.
6SDUNVFRXOGLJQLWHWKHVHPDWHULDOV
15.
Do not use accessories that require liquid
coolants.
Using water or other liquid coolants
may result in electrocution or shock.
16. Maintain labels and nameplates on the tool.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
17. Avoid unintentional starting.
Prepare to begin work before turning on the tool.
18. Do not depress the spindle lock when
starting or during operation.
19. Do not leave the tool unattended when the
Battery Pack is connected. Turn off the tool,
and remove the Battery Pack before leaving.
20. Use clamps (not included) or other practical
ways to secure and support the workpiece to
a stable platform. Holding the work by hand
or against your body is unstable and may
lead to loss of control and personal injury.
21.
The battery charger gets hot during
use. The charger’s heat can build up
to unsafe levels and create a fire
hazard if it does not receive adequate
ventilation, due to an electrical fault, or if it is used
in a hot environment.
Do not place the charger on a flammable surface.
Do not obstruct any vents on the charger.
Especially avoid placing the charger on carpets
and rugs; they are not only flammable, but
they also obstruct vents under the charger.
22. This product is not a toy.
Keep it out of reach of children.
23. People with pacemakers should consult their
physician(s) before use. Electromagnetic fields in
close proximity to heart pacemaker could cause
pacemaker interference or pacemaker failure.
In addition, people with pacemakers should:
• Avoid operating alone.
• Do not use with power switch locked on.
• Properly maintain and inspect
to avoid electrical shock.
• Properly ground power cord. Ground Fault Circuit
Interrupter (GFCI) should also be implemented
– it prevents sustained electrical shock.
24. The warnings, precautions, and instructions
discussed in this instruction manual cannot
cover all possible conditions and situations
that may occur. It must be understood by the
operator that common sense and caution are
factors which cannot be built into this product,
but must be supplied by the operator.
