Page 4
For technical questions, please call 1-888-866-5797.
Item 58308
SA
FETY
OPERA
TI
O
N
MAINTENANCE
SETUP
Battery tool use and care
1.
Recharge only with the charger specified by
the manufacturer.
A charger that is suitable
IRURQHW\SHRIEDWWHU\SDFNPD\FUHDWHDULVN
RIILUHZKHQXVHGZLWKDQRWKHUEDWWHU\SDFN
2.
Use power tools only with specifically
designated battery packs.
Use of any other
EDWWHU\SDFNVPD\FUHDWHDULVNRILQMXU\DQGILUH
3.
When battery pack is not in use, keep it away
from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal
objects, that can make a connection from
one terminal to another.
Shorting the battery
terminals together may cause burns or a fire.
4.
Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
If contact accidentally occurs, flush with water.
If liquid contacts eyes, additionally seek
medical help.
Liquid ejected from the
battery may cause irritation or burns.
Service
Have your power tool serviced by a qualified repair person using only identical replacement parts.
7KLVZLOOHQVXUHWKDWWKHVDIHW\RIWKHSRZHUWRROLVPDLQWDLQHG
Safety Warnings Common for Grinding,
Sanding, or Wire Brushing Operations
1.
This power tool is intended to function as
a grinder, sander, or wire brush. Read all
safety warnings, instructions, illustrations and
specifications provided with this power tool.
Failure to follow all instructions listed below may
result in electric shock, fire and/or serious injury.
2.
Operations such as polishing or cutting-
off are not recommended to be performed
with this power tool.
Operations for which
the power tool was not designed may create
a hazard and cause personal injury.
3.
Do not use accessories which are not
specifically designed and recommended
by the tool manufacturer.
Just because the
DFFHVVRU\FDQEHDWWDFKHGWR\RXUSRZHUWRRO
LWGRHVQRWDVVXUHVDIHRSHUDWLRQ
4.
The rated speed of the accessory must be at
least equal to the maximum speed marked on
the power tool.
Accessories running faster than
WKHLU5$7('63(('FDQEUHDNDQGIO\DSDUW
5.
The outside diameter and the thickness of your
accessory must be within the capacity rating
of your power tool.
Incorrectly sized accessories
cannot be adequately guarded or controlled.
6.
The arbor size of wheels, flanges, backing
pads or any other accessory must properly
fit the spindle of the power tool.
Accessories
with arbor holes that do not match the mounting
KDUGZDUHRIWKHSRZHUWRROZLOOUXQRXWRIEDODQFH
YLEUDWHH[FHVVLYHO\DQGPD\FDXVHORVVRIFRQWURO
7.
Do not use a damaged accessory.
Before each use inspect the accessory such
as abrasive wheels for chips and cracks
,
EDFNLQJSDGIRUFUDFNVWHDURUH[FHVVZHDU
,
wire brush for loose or cracked wires
. If power
tool or accessory is dropped, inspect for
damage or install an undamaged accessory.
After inspecting and installing an accessory,
position yourself and bystanders away from
the plane of the rotating accessory and run
the power tool at maximum no-load speed
for one minute.
Damaged accessories will
QRUPDOO\EUHDNDSDUWGXULQJWKLVWHVWWLPH
8.
Wear personal protective equipment. Depending
on application, use face shield, safety goggles
or safety glasses. As appropriate, wear dust
mask, hearing protectors, gloves and workshop
apron capable of stopping small abrasive or
workpiece fragments. The eye protection must
be capable of stopping flying debris generated
by various operations.
7KHH\HSURWHFWLRQPXVW
EHFDSDEOHRIVWRSSLQJIO\LQJGHEULVJHQHUDWHGE\
YDULRXVRSHUDWLRQV7KHGXVWPDVNRUUHVSLUDWRU
PXVWEHFDSDEOHRIILOWHULQJRXWSDUWLFOHVJHQHUDWHG
E\\RXURSHUDWLRQ3URORQJHGH[SRVXUHWRKLJK
intensity noise may cause hearing loss.
9.
Keep bystanders a safe distance away
from work area. Anyone entering the
work area must wear personal protective
equipment.
)UDJPHQWVRIZRUNSLHFHRURID
broken accessory may fly away and cause
LQMXU\EH\RQGLPPHGLDWHDUHDRIRSHUDWLRQ
