Instruction Manual
for WPT, KTS, KPS, KTM, WSM series use and maintenance
pag. 45
ENGLISH
Table 2
3.5 - HYDRAULIC DIAGRAM (H VERSION)
The hydraulic system required for the operation of the Rotary blades vacuum pump .../H is schematized in the version with
unidirectional and bi-directional motor shown below and the technical characteristics of the hydraulic motor in table 1.
The splining of the hydraulic motor is of type SAE 16/32” D.P. for KTS and KTM series, Z=23 DIN 5482-Z23 for WPT series. The
direction of rotation of single-acting motors must match circuit connections. Check that the coupling flange correctly aligns the user
shaft and the motor shaft.
3.6 - HYDRAULIC MOTOR USE AND MAINTENANCE INSTRUCTIONS
Make sure, with unidirectional motors, that the rotation direction is consistent with the circuit connections. Check that the coupling
flange correctly aligns the user shaft and the motor shaft.
1
2
HYDRAULIC SYSTEM
3
5
7
4
6
M
1
WPT - KTS - KPS - KTM - WSM
2
3
4
5
6
7
UNIDIRECTIONAL MOTOR
M
Aspirator
Compressor
Water pump flow
rate[ l/min ]
Pump speed
Water [ rpm ]
Water tank
content
Pipes Diameter
[ “ ]
Heat to be
dissipated [ kJ/h ]
WPT
12
1000
20
½”
63.000
KTS
30
1000
40
63.000
KPS
30
1000
20
63.000
KTM 1200
60
2000
25
63.000
KTM 1500
60
2000
27
63.000
KTM 1800
60
2000
62
63.000
KTM 2300
60
2000
75
63.000
WSM 2700 - 3300
60
2000
60
1”
120.000
