Instruction Manual
for WPT, KTS, KPS, KTM, WSM series use and maintenance
pag. 39
ENGLISH
.../G VERSION –…/GA VERSION (ROTARY BLADES VACUUM PUMP FOR GARDA GROUP)
• … / G version of Rotary blades vacuum pump that is applied on the GARDA
or the LEDRA group; it cannot be used on its own. This version can be
recognised by the external pinion placed at the front of the Rotary blades
vacuum pump and by the identification plate.
• … / GA version of Rotary blades vacuum pump that is applied on the
GARDA or the LEDRA group at 1000 rpm; it cannot be used on its own.
This version can be recognised by the external pinion placed at the front of the
Rotary blades vacuum pump and by the identification plate.
…/ K VERSION …/KA VERSION
(WITH GEARBOX AND HYDRAULIC PUMP SUPPORT)
/ K the PTO is driven by means of a cardan shaft at 540 rpm and it is designed
to drive a pump unit 2 or unit 3. The version is recognisable by the hydraulic
pump support and the identification plate.
• ... / KA the PTO is driven by means of a cardan shaft at 1000 rpm and it is
designed to drive a pump unit 2 or unit 3. The version is recognisable by the
hydraulic pump support, by the identification plate and by the punching placed
on the upper part of the box.
1.1 - IDENTIFICATION LABEL
Each Rotary blades vacuum pump is provided with an identification plate, where is indicated:
- Rotary blades vacuum pump model
- serial number
- year of production
- relatiive maximum pressure
- maximum vacuum
- Maximum power consumption
- maximum speed
- maximum capacity
- CE marking
- pump weight
RIGHT
ROTATION
LEFT
ROTATION
IDENTIFICATION LABEL WITH PAINTING
PROTECTIVE FILM
Each identification label is protected by a special light blue film to be
removed once painted.
This film has been introduced to ensure the above mentioned data
traceability and to not lose your warranty.