Basler L301kc, Инструкция по установке и эксплуатации

Страница: 85 / 124

Configuring the Camera
Basler L301kc 4-15
DRAFT
4.2.4.5 Spatial Correction Delay in Lines
Purpose: To set the delay in lines for spatial correction or to read the delay in lines. See Section 3.5.3
for an explanation of spatial correction.
Type: This is a read or write command.
Read Command: Cmd-ID R/W-Flag Data Length Data
0xAD 1 1 -
Response: Cmd-ID R/W-Flag Data Length Data
0xAD 0 1 1 Byte
Write Command: Cmd-ID R/W-Flag Data Length Data
0xAD 0 1 1 Byte
Response: None
Data Format: Byte 1 An ID that specifies the spatial correction delay in lines
(see the table below).
ID Spatial Correction Delay in Lines
0x00 No spatial correction
0x01 One line
0x02 Two lines
0x03 Three lines
0x04 Four lines
0x05 Five lines
0x06 Six lines
0x07 Seven lines
0x08 Eight lines
0x09 Nine lines
0x0A Ten lines
0x0B Eleven lines
0x0C Twelve lines
0x0D Thirteen lines
0x0E Fourteen lines
0x0F Fiveteen lines
0x10 Sixteen lines