Configuring the Camera
AW00101510000
10
Basler IP Fixed Dome Cameras
4. A
Camera Configuration
menu will open on the left side of the client as shown below. Notice
that the parameters used to configure the camera appear in groups such as the
Image
Controls
group and the
Streaming
group.
You can open a parameter group by clicking the
+
sign beside the group name.
By default, the camera is set so that video stream 0 is an MJPEG stream, and a
Live Stream 0
tab will appear in the client as shown below. A live video stream will appear in the tab.
If more than one video stream is enabled, there will be an additional
Live Stream
tab available
for each enabled stream.
Depending on the type of web browser you are using and depending on how you set the stream
settings, some or all of the following buttons and boxes will appear below the live stream:
Stop
- Click the
Stop
button to stop live image streaming. (A
Start
button will appear, which will
let you restart the live stream.)
Snapshot
- Click the
Snapshot
button to capture a single image within a new browser window.
The last available image in the live or the alarm buffer will be delivered. The
Snapshot
button
is only available with JPEG video encoding.
Refresh Rate
- The
Refresh Rate
box displays the rate at which the images displayed in the
web client are refreshed. Use the
button to change the refresh rate.
