Basler BE1-CDS240, Инструкция по эксплуатации

Страница: 451 / 580

9365200990 Rev F BE1-CDS240 Testing and Maintenance 13-75
Table 13-82. Mode 1 Test Commands
Command Purpose
A= Gains write access.
SL-N=NONE Zero out custom logic settings. Overwrite with logic = None settings.
Y Confirm overwrite.
SL-N=MODE1 Sets MODE1 as custom logic name.
SL-43=1 Sets 43 to Mode 1 operation.
SL-VO1=43 Enables OUT1 to close for 43.
EXIT Exit.
Y Save settings.
Step 2:
Prepare to monitor the virtual switch operation.
Step 3: Transmit the commands in Table 13-83 to the relay or, navigate to Screen \CTRL\43\43 to set
the mode of the 43 Switch to the TRUE state (logic 1).
Result: OUT1 contact closes and remains closed.
Table 13-83. Mode 1 Test Commands
Command Purpose
A= Gain write access
CS-43=1 Selects virtual switch 43 for change to closed (True) state
CO-43=1 Executes virtual switch 43 for change to closed (True) state
Step 4:
Transmit the commands in Table 13-84 to the relay or, navigate to Screen \CTRL\43\43 to set
the mode of the 43 Switch to the FALSE state (logic 0). It is not necessary to gain access for
the following steps unless access times out.
Result: OUT1 contact opens and remains open.
Table 13-84. Mode 1 Test Commands
Command Purpose
CS-43=0 Selects Virtual Switch 43 for change to open (False) state
CO-43=0 Executes Virtual Switch 43 for change to open (False) state
Step 5:
Transmit the commands in Table 13-85 to the relay or navigate to Screen \CTRL\43\43 to set
the mode of the 43 Switch to the pulse state.
Result: OUT1 contact closes for 200 milliseconds and returns to the open state.
Table 13-85. Mode 1 Test Commands
Command Purpose
CS-43=P Selects Virtual Switch 43 for change to closed (True) state and return open.
CO-43=P Executes Virtual Switch 43 for change to closed (True) state and return open.
Virtual Switch Mode 2 Operation (On/Off)
Purpose
: To verify virtual switch Mode 2 operation.
Reference Commands:
SL-143, CS/CO-143