BASF EXACTUS IFM8-I Скачать руководство пользователя страница 1

 

EXACTUS

®

 

IFM8-IA and IFM8-I Industrial Mux User’s Guide

 

Ver. 1.9 

 

 

 

BASF Corporation 

Temperature Sensing Group 

46820 Fremont Blvd. 

Fremont, CA  94538-6540 

Phone: (510) 490-2150 

Fax: (510) 252-1871 

BASF Corporation 

Temperature Sensing Group 

4011 SE International Way, Suite 604 

Portland, OR 97222 

Phone: (503) 794-4073 

Fax: (503) 794-5591 

 

http://www.catalysts.basf.com/tempsensing

 

 

Copyright© 2014 BASF Corporation.  All rights reserved. 

 

Exactus and TemperaSure are registered trademarks of BASF Corporation.  The data contained in this publication are based on our current 
knowledge and experience. In view of the many factors that may affect processing and application of our product, these data do not relieve 
processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of 
the product for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights, etc. given herein may change without prior 
information and do not constitute the agreed contractual quality of the product. It is the responsibility of the recipient of our products to ensure that 
any proprietary rights and existing laws and legislation are observed.  

Although all statements and information in this publication are believed to be accurate and reliable, they are presented gratis and for guidance only, 
and risks and liability for results obtained by use of the products or application of the suggestions described are assumed by the user. NO 
WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS 
FOR A PARTICULAR PURPOSE, ARE MADE REGARDING PRODUCTS DESCRIBED OR DESIGNS, DATA OR INFORMATION SET 
FORTH. Statements or suggestions concerning possible use of the products are made without representation or warranty that any such use is free of 
patent infringement and are not recommendations to infringe any patent. The user should not assume that toxicity data and safety measures are 
indicated or that other measures may not be required. ©2014 BASF Corporation. 

Содержание EXACTUS IFM8-I

























Отзывы: