![background image](http://html1.mh-extra.com/html/bartscher/silversteam-5230m/silversteam-5230m_manual_4167931033.webp)
Operating Instruction
116622
31 / 40
EN
Thermal Core Probe Connection
1. To connect the thermal core probe, remove
the plug
A
(Fig. 12) from the connection
location in the upper left corner of the
appliance.
2. Press and hold the red lock
B
and insert the
thermal core probe
C
(Fig. 13) into a
dedicated opening.
3. Finally, release the red lock
B
.
4. To remove the thermal core probe, press the
red lock B again and remove the thermal core
probe
C
.
5. Release the red lock
B
.
6. Re-fit the plug
A
in the connection location.
Fig. 12
Fig. 13
Placing Thermal Core Probe in Proper Location within the Food
ATTENTION!
To avoid any damage to the thermal core probe, introduce it into the
appliance only over the door.
The thermal core probe is set by inserting it in the prepared food, until its tip is
located inside the food (where the thickness of the prepared food is the greatest).
Thermal core probe detects temperature in a point located in the proximity of the
probe.