- 7 -
Finally, slide the disinfectant dispenser housing onto the wall holder until the
locking button clicks.
Insert the tube into the filled up disinfectant container and move it upwards until it
stands steadily on the lower shelf of the housing.
Re-filling / dispensing disinfectant
To refill the disinfectant container remove it from the disinfectant dispenser housing
as described above.
Fill the disinfectant dispenser container with the appropriate disinfectant.
Insert the tube to the disinfectant dispenser container and place it back into the
housing, move it upwards until it stands on the lower shelf.
Dispense the disinfectant from the container
according to needs by pressing the elbow
against the operating lever and hold the other
hand under the outlet.
Note:
At the first time operation, press the
operating lever several times to the stop
until the disinfectant dispenser starts
dispensing. Hold the hand under the outlet.
Cleaning and disinfecting of housing and dosing pump
Do not use any scouring, aggressive or chlorine containing cleaning agents to
clean the disinfectant dispenser.
Regularly perform disinfecting cleaning by wiping external surfaces of the disinfectant
dispenser.
Before each refilling of the disinfectant dispenser prepare it manually. Follow the
below described steps.
Remove the disinfectant dispenser container from the
housing, completely empty it before refilling with the
disinfectant.
Remove the dosing pump from the housing by holding the
operating lever in the upper position and remove the dosing
pump from the rear by slightly lifting it up.
Thoroughly clean the dosing pump under hot running water.
Dry the dosing pump and tube by wiping them with the
disposable towel.
