e
1. Carefully remove all parts from packaging and poly bags.
• 4 easy-to-install back snap system (optional accessory)
c.
g.
h.
f. Narrow Nozzle
Container
Label Holder
Handle
Handle Clip
i.
2.
3.
4.
Please contact our customer support at (847)763-1215 and we’ll be
happy to assist with any assembly questions, comments or concerns.
ROSSETO
®
3600 W. Pratt Avenue. Lincolnwood, IL 60712
Visit our website at:
www.rosseto.com
NEED ASSISTANCE?
ITEM # EZL006
ITEM # EZP004
ITEM # EZM005
a
b
i
ITEM # EZH012
h
ITEM # EZM006
g
CONTAINER
SHELL
:
ITEM # EZC008
•
You will have 4 EZ-PRO™ containers each with:
a.
b.
Stainless steel lid
3 interchangeable portion wheels:
j
j.
k. PRO Fresh Lid
5.
PRO 6-Wing Silicon 1 oz. Portion Wheel
PRO-6SM 1 tbsp.
d. EZP007 1 tsp. Scoop-It
TM
with Funnel
2 interchangeable nozzles:
e. Regular Nozzle
•
•
c
ITEM # PRO6-SM
ITEM # EZM004
f
ITEM # EZM056
6. Fill an EZ-PRO™ container with desired product and seal with the lid.
d
ITEM # EZP007
k
ITEM # EZL009
•
SETTING UP YOUR PRODUCT
EZ-PRO™ C4L (EZP2760)
Your EZ-PRO™ 4-container Carousel has a 6-inch clearance, making it the perfect table-top dispenser for
both cereal and topping products. This model is a space-saving stylish solution for your dispensing needs!
1 Assembled EZ-PRO™ C4L metal base with pole and detachable tray
Make sure you have all parts listed above before discarding packaging.
Place the metal base on a flat surface.
Check if the tray and the pole are set securely on the base.
Check the portion wheels installed and make sure you use the right fit for each product you are dispensing.
NOTE: If you need to change any portion wheels, follow steps 2 thru 5 on the disassembly instructions on Page 2.
TRAY
POLE
9. Repeat steps 5 thru 7 for the remaining containers.
10. Dispense as you please!
8. If desired, place an identifying label on the label holder.
7. On the back of each container are 2 hooks that fit snugly
onto the allotted notches on the pole. Install a container by
securing both hooks on the upper and lower notches. Make
sure it locks into place.
2 hooks on the back of
the EZ-PRO
TM
container
latch on to the upper
and lower notches on
the pole.
NOTE: Included with each
container unit is an optional
locking system that you can
easily install with a small
Phillips head screwdriver.
(ITEM # EZM048)
NOTE:
Please remove the
clear plastic nozzle
when using EZP007 or
any of the Scoop-It
TM
Portion Wheels.
11. When not in use, fasten the PRO Fresh Lid onto the nozzle.
BASE
