U-Line TORK H-5807 Quick Manual Download

Page: 1 / 4

PAGE 1 OF 4

0422 IH-5807

H-5807

TORK

PLASTIC PUSH

FOAM SOAP DISPENSER

1-800-295-5510

uline.com

NOTE: Install dispenser at least 6" above

counter or sink.

1. Tape included template to wall to use as a guide.

Ensure template is level. (See Figure 1)

Figure 1

2. Drill four holes using 1/4" drill bit and remove

template from wall. (See Figure 2)

Figure 2

INSTALLATION

PARTS

TOOLS NEEDED

Level

Tape Measure

1/4" Drill Bit

Drill

Phillips Screwdriver

Screw x 4

Dispenser x 1

Wall Anchor x 4

Key x 1

Template

Summary of Contents for TORK H-5807

Page 1: ...r sink 1 Tape included template to wall to use as a guide Ensure template is level See Figure 1 Figure 1 6 2 Drill four holes using 1 4 drill bit and remove template from wall See Figure 2 Figure 2 INSTALLATION PARTS TOOLS NEEDED Level Tape Measure 1 4 Drill Bit Drill Phillips Screwdriver Screw x 4 Dispenser x 1 Wall Anchor x 4 Key x 1 Template ...

Page 2: ...tely until step 6 Figure 3 4 Open dispenser and hold up to wall Align holes over screws See Figure 4 See Opening on page 4 Figure 4 5 Lower dispenser onto screws See Figure 5 Figure 5 6 Tighten screws See Figure 6 Figure 6 LOADING 1 Before loading turn collar of refill counterclockwise until click is heard See Figure 7 Figure 7 Refill ...

Page 3: ...own and load into dispenser with nozzle down See Figure 8 Figure 8 3 Push refill down until it clicks into place See Figure 9 Figure 9 4 Close cover See Figure 10 Figure 10 5 Push lever to dispense soap See Figure 11 Figure 11 INSTRUCTIONS CONTINUED ...