- 47 -
8. Possible Malfunctions
Error
code
Cause
Solution
E01
•
Short-lasting low voltage
(<160V).
•
Disconnect the device from the power
supply (pull the plug!). The socket to
which the device is connected must
have the voltage consistent with the
data indicated on the rating plate.
E02
•
Short-lasting power surge
(>270V).
•
Disconnect the device from the power
supply (pull the plug!). The socket to
which the device is connected must
have the voltage consistent with the
data indicated on the rating plate.
E03
•
The device becomes too
hot (e.g. due to blocked
ventilation slots).
•
Parts are damaged (e.g.
transistor).
•
Clear/unblock ventilation slots. Let the
device cool off for a few minutes; the
device is ready for operation afterwards.
Contact the retailer in case the error
message is shown again on the digital
display.
•
Contact the sales agent.
E05
•
The overheating protection
was activated in the
working mode (>150 °C).
The device switches off.
•
Disconnect the device from the power
supply (pull the plug!). Remove the
cookware from the cooking zone.
Let the device cool off for a few minutes.
The device is ready for operation
afterwards.
E06
•
Damaged temperature
sensor or short-circuit.
•
Contact the sales agent.
E07
•
The overheating protection
was activated in the tempe-
rature mode (>240 °C).
The device switches off.
•
Disconnect the device from the power
supply (pull the plug!). Remove the
cookware from the cooking zone.
Let the device cool off for a few minutes.
The device is ready for operation
afterwards.
E08
•
Damaged temperature
sensor.
•
Contact the sales agent.
