- 43 -
Turning the device on
•
Select the cooking zone and place an appropriate cookware with the prepared dish
in the middle of the selected zone.
CAUTION!
Never place an empty cookware on the cooking zone.
Warming up an empty pot or frying pan activates the protection system
against overheating; an audio signal will sound and the device turns off.
On the digital display an error code „E05“ will be displayed.
Disconnect the device from the power supply (pull the plug!), remove the pot
from the cooking zone and leave the device for a few minutes to cool off.
After that you can put a pot or frying pan with appropriate contents and turn
the device on.
•
Connect the device to a single grounded outlet.
An audio signal will sound.
•
„-L-“ or „-H-“ will appear on digital displays of individual cooking zones.
If the temperature of the cooking zone is lower than 50 °C, „-L-“ will appear on the
display, whereas for the temperature exceeding 50 °C, the display will show „-H-“.
•
The device is in the standby mode.
•
Press ON/ STANDBY button
. STANDBY mode LED indicator will flash.
NOTE!
If within 30 seconds from pressing the button
no further adjustments
are made, the device will automatically return to the STANDBY mode.
•
„-L-“ or „-H-“ indications for selected cooking zones will disappear.
•
LED indicators for power levels
or
for the selected cooking zone will come on
and the pre-set power level „5“ will appear on the display. The device is ready for
function selection.
NOTE!
To simmer or cook food (max temperature of 170 °C) select one of the
power levels.
To bake or fry in deep fat (max temperature of 240 °C) select one of the
temperature ranges (60 °C - 240 °C).
