Bartscher EROS EROS MIX 4/1, Инструкция по эксплуатации

Страница: 33 / 60

3
Before switching the appliance
• Check if the electrical system can withstand the appliance’s load (WATT as indicated
on the technical plate).
• Make sure that the electrical system is provided with ground connection according to
the current norms and guidelines.
• Connect the appliance with the ground network through a cable connected to the
specific screw placed on the external casing of the appliance (See Component n°15
page. 6).
4.1 Appliance Start-up
4.1.1 Warm side
Once ready to switch on the appliance, plug the device in the electrical system and
turn the thermostat knob to the desired temperature. If the switch light is turned on, the
device is working correctly and is reaching the selected temperature.
Once started up, the appliance reaches the selected temperature in about one hour
(it depends much on the starting temperature, the room temperature and the exposure of
the buffet trolley).the switch will turn off once the device has reached the selected
temperature.
The appliance will keep the temperature during the service time.
This buffet trolley has been designed and created to work exclusively
through the “bain-marie” system, therefore It shall never be turned on
when without water in the tank.
4.1.1 Refrigerated side
Once ready to switch on the appliance, plug the device in the electrical system and press
the power switch placed on the compressor front grid. You will hear a soft buzzing coming
from the compressor and the thermostat display will show the starting temperature of the
device. Once started up, the appliance reaches the selected temperature in about one
hour (it depends much on the starting temperature, the room temperature and the
exposure of the buffet trolley). The thermostat is set from the manufacturer on +2°C for a
optimal use of the device. Use the attached instructions to change the settings of the
digital thermostat.
CAUTION! Any change in the thermostat settings must be done on the
temperature only. Any other parameter changes can affect and damage
the operation of the compressor
PLEASE REFER TO THE ATTACHED INSTRUCTIONS