- 68 -
5.1.6 Connecting to the drain
In the water drain tank in front of the device
there is the drain hose (internal diameter 10
mm) used for removing excess of liquid from
the tank and installed at the back, under the
device (
A
– fig. on the right).
To connect to appropriate drain system
properly extend the included hose.
Included drain pipe (
B
) should be fixed to
the drain hole under the device to assure
liquid flow from the chamber. Drain pipe
must be connected with use of appropriate
hose (
Ø
22 mm)
and led to the drain
system.
5.1.7 Connecting supply hose for cleaning agents
The supply hose for cleaning agents is
permanently connected to the pump in the lower
part of the device.
The supply hose for cleaning agents (
T
) should be
immersed as deep as possible in the container
with appropriate cleaning agent (fig. on the right).
5.1.8 Start-up and acceptance
Prior to
activation
of electrical devices, all inspections must be thoroughly conducted in
order to confirm compliance of the device and its installation with all legal, technical and
safety norms.
A
B
