- 75 -
8. Possible Malfunctions
Failure
Possible solutions
The device cannot be
turned on
•
Check if there is electric voltage and the main switch is
turned on.
•
Check the fuses in the device.
•
Make sure that the glass door is properly closed.
•
Check if the parameters of selected cooking cycle are
correct.
•
Make sure that there are no error messages.
When it is still not possible to start the device after above activities, contact the
service company.
The fan stops during
the operation
•
Turn the device off and wait until the overheating protection
starts the motor automatically.
•
Make sure that the ventilation holes are permeable.
When the failure persists contact the service company.
The chamber
illumination does not
work
Use only temperature-resistant light bulbs!
The internal illumination bulb replacement procedure:
-
make sure that the switch before the device is
turned off,
-
loosen the bolts and remove the shelves rails
from the left internal wall of the device,
-
unscrew the illumination cover bolts,
-
remove the cover, glass and seal,
-
replace the damaged bulb with new halogen bulb 25 W,
-
replace the cover, glass and seal,
-
reinstall the shelves rails.
When the failure persists contact the service company.
The water is not
supplied through the
moistening pipes
•
Check if the water valve is opened.
When the failure persists contact the service company.
