- 68 -
6.4.8 Setting of the automatic pre-heating of the device chamber
In order to achieve good preparation effect we recommend pre-heating of the device
chamber with use of pre-heating function.
It may be realized automatically during the start of the cooking program.
After entering the parameters for the first cooking phase as described above press key
T9
(fig. 17) and rotate knob
M
(fig. 17) counterclockwise until the indicator
D4
(fig. 17)
shows
PRE? N
. Press knob
M
(fig. 17) to activate the automatic pre-heating. The
indicator
D4
(fig. 17) shows
PRE? Y
. Then rotate knob
M
(fig. 17) clockwise to return
to the selected cooking phase or start the new phase.
After starting with key
T14
(fig. 17) the device starts pre-heating.
The automatic pre-heating heats the device to the temperature higher by 25°C than the
temperature set for phase 1 in order to assure better temperature after opening of the
glass door and placing the cold product in the chamber.
When the entered temperature is reached the acoustic signal is emitted. Then it is
allowed to place the food in the device chamber.
Caution: pre-heating must be realized with empty chamber. Before placing the
food inside wait for the acoustic signal.
PRE? Y STEP 1 STEP 2 STEP 3 STEP 4
→
Fig. 17
D4
00:50
50
0 HU PRE? Y
M
T9
T14
