- 52 -
•
The device must be positioned on the even surface to avoid its slipping or turning
over.
•
The floor in the installation place must have load carrying capacity sufficient for
weight of the device, its base and weight with full load.
Fig. 1
The device is not designed for installation
in the furniture and it is required to keep the
minimum distance of 50 mm from the walls
and other devices (fig. 1).
Assure the possibility of full opening of the glass
door (180°).
Position the device in such way that its back side
is easily accessible for connecting the electric and
water supply and for maintenance.
Level the device. Use the level and appropriately
position the adjustable feet (fig. 2).
The height differences or tilting may negatively
influence the device operation.
Carefully remove the protective foil from the
external walls, avoiding leaving the glue
residuals.
Check if the ventilation holes and the vapours
outlet are not covered or blocked.
Fig. 2
