- 26 -
5.3 Operating
Prior to first use
•
Prior to first use it is necessary to run 2 or 3 cycles of water through the machine
without coffee, in order to properly rinse the unit („Preparation of coffee“ steps 1-8).
•
Due to the nature of the system a small amount of water always remains in the container
for water. It is necessary to take this into account when refilling the container.
•
Always fill the water container with an
amount of water equal to the capacity
of the thermo pump jug included with
the coffee machine. The amount of
coffee brewed will be the same as the
amount of water poured.
•
If too much water is poured into the
water container, excess water will
drain out through the flow hose.
•
The thermo jug and filter basket with insert should be thoroughly washed in warm
water and a mild cleaning agent, then rinsed in clean water. Dry thoroughly after
washing.
CAUTION!
When cleaning, be aware of the
removable insert at the bottom of the
filter basket. After cleaning, replace the
insert in the filter basket so that it is
secured to the bottom of the filter and
will not be accidentally thrown out while
disposing of coffee grounds.
When brewing coffee without the insert,
the paper filter can block the filter basket’s
drip flow opening and hinder the flow of
coffee to the pot.
•
The unit's casing should be wiped with a moist cloth and dried with a soft towel.
•
Connect the unit to an appropriate power source which serves one piece of
equipment.
•
The coffee machine is now ready for use.
•
The drip coffee stations can be used simultaneously or separately, as needs dictate.
Flow hose
Filter basket
Insert
