![background image](http://html.mh-extra.com/html/bartscher/900004/900004_instruction-manual_476672016.webp)
- 41 -
6.2 Cleaning and disinfection
Cleaning and disinfection are performed in the following way:
Empty the container
, (section 6.2.1)
Remove the container from the device
, (section 6.2.2)
Remove the outlet tap from the device
, (section 6.2.3)
Clean the bowl and outlet pipe
, (section 6.2.4)
Disassemble the outlet tap
, (section 6.2.5)
Clean and disinfect the device parts
, (section 6.2.6)
Reassemble the container and place it on the device bottom
, (section 6.2.7)
Clean the outlet tap parts, reassemble the tap and reinstall it in the device
,
(section 6.2.7)
Clean and disinfect the device internal parts
, (section 6.2.8)
Clean the drip tray
, (section 6.2.9)
Clean the container lid
, (section 6.2.10)
Empty the water tank
, (section 6.2.11)
Clean and descale the water tank
, (section 6.2.12)
6.2.1 Container emptying
Before cleaning empty the container by
moving the outlet tap lever when the
device is turned on. (fig. 11)
Fill the container with water and set the
temperature controller to 50 °C. Turn the device
on for at least 15
– 20 minutes to separate the
product residuals from the container walls.
Again empty the container by moving
the outlet tap lever.
WARNING!
The outlet tap releases very hot liquid. There is the burn hazard!
Fig. 11